Diaphragm pressure gauges are believed as specialists in the process industries. They enter into play when Bourdon tube pressure gauges reach the limits of these performance. One of the benefits of diaphragm pressure gauges is the measurement of low pressures.
Diaphragm pressure gauges could be recognised from the initial look: From the flanges below the case, between which the elastic pressure element ? the diaphragm element ? is clamped. These instruments can measure pressures from only 16 mbar, with the maximum value at around 25 bar (for comparison: Bourdon tube gauges reach their lowest physically possible measured value at 600 mbar). The larger the diaphragm element, the low the measurable pressure is, relative to the formula ? pressure = force / area. WIKA uses two diaphragm sizes: with a diameter of 134.5 mm for the measuring ranges of 0 ?16 mbar around 0 ? Protected and a diameter of 76.5 mm for the measuring ranges of 0 ? 400 mbar up to 0?25 bar.
Special variation of diaphragm pressure gauges
With pressures under 16 mbar, diaphragm pressure gauges hit their limits. Because of this case, their diaphragms would need to be exceptionally thin in order to achieve the required elasticity. Then, however, they would no more remain reliably stable. This issue can be solved, though, with a particular variation of the diaphragm pressure gauge: the capsule pressure gauge.
Capsule elements contain two diaphragms welded together, which are generally loaded with pressure from the inside. This results in a double diaphragm travel. In this way, even the lowest of pressures could be measured without reducing the wall thickness. However, since the pressure chamber isn’t self-draining, capsule elements aren’t ideal for applications with liquid media.
Note
You can find more info on diaphragm pressure gauges on the WIKA website beneath the headings Pressure gauges and Pressure gauges with output signal.
See also our article
Advantages of diaphragm pressure gauges (2): High overload protection