The versatility of Pneumatic high stress grouting pumps

Peumatic Grouting pump is designed for strain and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes to find a way to reinforce the unfastened rock mass. The maximum grain size cannot exceed zero.2 mm.
Grouting pump operation and maintenance is simple, secure and reliable. This pump is utilized in mines working beneath troublesome conditions as a end result of it’s reliable and explosion-proof.
Basic Pneumatic Grouting pump embrace: An air inlet, the pneumatic cylinder, mounting base body and stand, strain gauge, pumping cylinder, outlet with quick launch coupling and wheels.
How it actually works
Pneumatic stress within the air cylinder exerts a excessive stress on the grout mixture which results in ejection of grout with a excessive stress and velocity. The valves of the air cylinder in the pump function routinely to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to complete the pumping cycle.
Pneumatic grout pump can be driven even without Electrical power supply in remote areas through the use of engine pushed compressor.
Applications
The pump is majorly utilized in building and mining industry for injecting materials into extensive and medium size hole in beams, columns ,basement walls and flooring, raise shaft concrete wall fill-up and so on. In mining business it’s used to replenish cement solution the place there’s a hole exists between construction and rock and for soil stabilization.
Detachable design tends to straightforward upkeep and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is widely utilized in tunnels, coal mine, bridges and dams, constructing basis, and different underground projects, and inflammable, explosive websites and other bad environment.
It has utility in chemical business also to pump out chemical slurries.
The pump is electricity free so, can be used at any web site condition whether it is rural or city.
Mining Pneumatic Grouting pump has a larger discharge slurry adjustment range. Generally the ultimate quantity of the grouting volume is eight or10 instances of the quantity in the beginning. And ร้านซ่อมเครื่องวัดความดันomron grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s stress and circulate may be adjusted in accordance with the necessities of grouting,(The move of grouting pump is 0-100L/min, strain of discharge is 0-10MPa).apart from, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is especially used for highways, railways, water and electrical energy, development, mining and so on. ground/underground development.
Benefits
Mining Pneumatic Grouting pump has the benefits of low vitality consumption, small vibration, low noise, small dimension, high effectivity, dependable efficiency, pressure and flow control, lengthy life and so on. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can additionally be Light weight and with a wheelie design it can be carried easily. It is designed for simple operation and low maintenance. Last but not least its spare parts are easily available.
Share

Leave a Comment